Use; Select The Intensity Level With Caution - BaByliss G940E Mode D'emploi

The Homelight epilator has a mechanism to protect your eyes
The Homelight epilator is designed with a built-in mechanism (contact sensor) that will
protect your eyes. This was designed so that the pulse cannot be emitted if the epilator is
aimed at open space. The safety mechanism only allows the appliance to work when the
application surface is touching the skin. Do not look at the area being treated when the unit
fl ashes.

6. Use

6.1. Select the intensity level with CAUTION!

The power intensity level designates the power of the pulsed light administered
to your skin during treatment, ranging from the lowest (1) to the highest (5)
levels.
The power indicator lights indicate the selected level of power. If you increase
the power, the results will be better, but there will also be an increased risk of
side eff ects (cf. the section "Possible side Eff ects").
CAUTION : 48 hours before using for the fi rst time, do a test on a leg (a few fl ashes) using level 1,
regardless of your skin type.
If your skin reacts correctly to the test, i.e. if you do not notice any abnormal reactions or discomfort in
the 48 hours following the test, you can select the power level of your appliance for your fi rst session
using the following chart:
For the fi rst session, people with phototype 1 or II skin should set the appliance to level 3 at
most. Gradually, over the next few sessions, if you do not experience any specifi c discomfort or
unpleasantness, the power level can be increased to level 4 and then to level 5.
50
It is nevertheless strongly advised that you wear the safety glasses
included during treatment sessions with the Homelight epilator.