Angelo Po 0G0FT1E Manuel D'utilisation Et D'installation page 25

DESCRIPTION OF CONTROLS
The appliance is fitted with
the controls for use of its
main functions.
A)Heating element con-
trol knob; for turning the
heating elements off and
on and setting their level.
B)Mains light; comes on to
indicate that the electricity
supply is on.
C)Temperature light;
comes on to warn that the
plate is not yet at the pre-
set temperature; the light
goes out when the temper-
ature is reached.
SWITCHING THE APPLIANCE ON AND OFF
Lighting
The first time the griddle is switched on, wash the
plate to remove the protective grease and any dirt,
then switch on the appliance and preheat it for
about 2 hours at the temperature of 195°C.
1 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
2 - Turn the knob (A) clockwise (pos. a) to the tem-
perature required to turn on the heating ele-
ments.
The lights (B and C) come on; when the working
temperature is reached, light (C) goes out.
Important
For appliances with chromium-plated and
compound plate, preheating of about 30
min. to the temperature of 190°C is neces-
sary the first time the appliance is switched
on each day.
Turning off
1 - Turn the knob (A) clockwise (pos. b) to turn off
the heating elements.
2 - Turn off the appliance's circuit breaker to dis-
connect it from the electrical mains.
A
B
C
- 7 -
Off marker
A
C
A
Temperature
marker
a
B
C
IT
B
A
GB
DE
FR
C
ES
b
English