Filling Instructions; Operation - Vortice VORT HYDRO CUBE Notice D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

Filling instructions

1. Take the tank out of the humidifier
Note: Do not add water to the base directly
2. Remove the top-fill water cap and add water from it directly.
3. Put the filter and the tank back on the base. There will be "gurgling" noises and air bubbles would appear in
the tank. The water takes aproximately 1 to 2 minutes to pass through the filter , be purified, sterilized and
softened. Once the are no more air bubbles, this indicates that the humidifier is ready to generate mist.

Operation

ON/OFF
When pressin the ON button the humidifier will start, all LED will flash and 2 beep sounds will be heard.
The display will then show "HI" and the humidifier will start to work.
The deafult status of the humidifier is the following:
- Humidity setting default as continuous working "CO"
- Timer OFF
- Cool mist
- Hi mode humidifying
- The display will show current humidity
When pressing the OFF button the humidifier will shut down, the display will show "OFF" and a longer beep
sound will be heard.
SPEED
The humidifier is in "HI" mode when turned ON.
If the speed button is pressed the speed will change to Low "LO", if pressed again it will switch back to "HI".
HI = 100% PWM, 350 ml
LO = 60% PWM, 150 ml
WARM MIST
The humidifier is in Cool mode when turned ON.
Press the warm button and the humidifier will switch to warm mist, the display will show "HOT" If pressed again
the display will show " ̶ H ̶ O ̶ T ̶ " and the then return to usual displa.
With the last press the warm mode will return to the "HOT" status.
TIMER (1-12h)
Each press of the timer button correspond to 1h , up to 12h, were 00h means no timer.
Once the timer is set it will begin the countdown and when it reaches 0h will shut down the humidifier. When in
count down it is possibile to add hours to the counting by pressing the timer button.
14
ON / OFF
SPEED
HUMIDITY
Top-fill water cap
Fragrance box
Nozzle 1
Nozzle 2
Water tank
Water level indicator
Base
Display panel
%
TIMER
WARM
MODE

Publicité

Table des Matières
loading

Table des Matières