Explore Scientific RDP1002 Mode D'emploi page 7

GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
the display is dim.
DC POWER ADAPTER
Only use a compatible DC Power adapter (5V
1000mA). Plug the power cable to the power jack and
the power adapter to a suitable power outlet.
NOTE: We recommend to insert batteries as backup
power source.
CLOCK
CLOCK RECEPTION
1. Replace batteries or press [
2. RCC receiving can work in both date mode and alarm
3. The receiving process duration is 10 minutes.
4. During receiving process, the RCC signal symbol
] displays, or when
5. If the RCC receiving process is successful, a completed
6. RCC receiving will automatically start at 1:00, 2:00,
7. To stop RCC reception, press the [
8. If the device is still not receiving the signal, please
RCC receiving.
mode.
[ ] flashes.
RCC symbol [ ] will be shown in the display and the
date and time will be set automatically. If it fails within
10 minutes, RCC setting will quit automatically. If that
happens, press [
receiving.
3:00, 4:00, 5:00 or 6:00 every night. Auto receiving
function will cease if it is successful.
proceed to set the time manually.
] button will initiate
] button to re-initiate RCC
] button.
EN
IT
DE
FR
ES
7