Oehlbach AD Bridge Mode D'emploi page 4

Thank you
for choosing an Oehlbach® quality product. Please read these instructions carefully; this will
ensure the full and error-free functioning of the product.
Oehlbach's AD Bridge is a premium quality analogue-to-digital converter. Analog signals are received via a two-
channel stereo RCA input. These are turned into digital, high resolution signals, which are issued optionally via an
optical or coaxial output. A high quality Cirrus Logic Chip converts the analog signals into digital signals without any
reduction in quality.
Functions
∙ Converts analog signals into digital audio signals with a 96kHz/24bit resolution
∙ Very handy product that can be installed and used in many different and flexible ways.
∙ Power supply via the supplied mains adapter
∙
Specification
Supported sampling rates:
Resolution:
Temperature range:
Permissible relative humidity:
Power supply:
Dimensions (w x h x d):
Weight:
Packaging contents
∙ 1 pc. Oehlbach AD Bridge
∙ 1 pc. Power adaptor
∙ 1 pc. Instruction manual
remarks
Please observe the following instructions in order to prevent any risk of fire, short-circuits or damage to the
product:
1. Do not expose the product to rain or moisture. Do not place any containers filled with water on the product.
2. Do not install the product in a bookcase, fitted cupboard or similarly enclosed spaces. Please ensure that there
is sufficient ventilation for the product.
3. You should not cover the product or place items on the product in order to prevent short-circuits or fire due to
overheating.
4. Do not place the product in proximity to sources of heat, e.g. heaters, stoves, etc.
5. Do not use the product in proximity to naked flames or candles.
6. Only use a dry cloth to clean the product.
7. Functionality may be restricted depending on the configuration of the device.
8. Please only use qualified service personnel to carry out repairs or servicing work.
4
96 kHz
24 bit
-15 to +50 °C
5 to 90%
5V/DC
63 x 23 x 68 mm
73 gr