Urmet 1096 Manuel D'utilisation page 19

This menu is used to vary the image viewing mode. Select this item to access the following submenu:
CONTRAST
SHARPNESS
SATURATE
COLOR GAIN
DNR
RETURN
CONTRAST
Point to this parameter to edit the contrast value. Levels which can be set from 1 to 50
SHARPNESS
This is used to vary image definition by setting values from 1 to 20.
SATURATE
Allows you to vary the color saturation of the images, by setting values from 1 to 16.
COLOR GAIN
Point to the parameter to edit the colour gain value. Levels which can be set from 1 to 31
DNR (NOISE REDUCTION)
This function (Dynamic Noise Reduction) is used to reduce 2D digital image noise visible particularly in
absence of light. Levels which can be set from 1 to 15
This menu permits to select resolutions and video formats of the images
HD
VIDEO STANDARD
RETURN
HD (High Definitions)
The camera can use four different video outputs, on the same BNC connector:
High definition video output AHD (Analog High Definition)
•
CVBS standard interlaced video output
•
Video output in TVI or CVI mode, only for 1080P resolutions. The correct working of these
•
standards depends upon the compatibility of the conncted devices, that can be guaranteed only
for the devices of Urmet catalogue.
VIDEO STANDARD
IMAGE ENHANCE
IMAGE ENHANCE
13
8
10
10
6
VIDEO SETTING
VIDEO SETTING
AHD
4MP 25