Perel WLC003 Mode D'emploi page 9

WLC003
6.3 Basic Working Mode
Slide the switch to the on position. After 15 seconds the camera will
enter the standby mode.
When a motion is detected, the camera take photos or record video
automatically according to the settings.
6.4 Basic Settings
Mode
Slide the mode switch to the on position and select the working mode.
In capture mode, the camera will take pictures only. In video mode,
the camera will record. In capture + video mode, the camera will take
a picture first and then record.
Options: Photo → Video → Photo & Video
Photo Resolution
Set the still image resolution.
Options: 16MP → 12MP → 8MP → 5MP → 3MP
Photo Series
Set the number of continuous photo capturing. In photo mode, the
camera will take photos continuously.
Options: 1 photo → 2 photos in series → 3 photos in series
Video Resolution
Set the video resolution. The bigger the resolution, the longer the
video which can be stored.
Options: 1920x1080P → 1280x720P → 720x480P → 640x480P →
320x240P
TL Video Resolution
Set the time-lapse video resolution.
Options: 2592x1944P → 2048x1536P
Video Length
Set the recording duration of a video clip.
Options: 3 s to 10 min
V. 01 – 12/06/2020 9 ©Velleman nv