Perel WLC003 Mode D'emploi page 13

Slide Show
Captures can be played in a slideshow. Press OK to stop the slideshow.
Write Protection
Lock or unlock the file as desired.
Options: Write-protect Current File → Write-protect All Files → Unlock
Current File → Unlock All Files
Night Mode
With insufficient ambient light, the IR LEDs will turn on automatically
to provide necessary light. However, reflective objects such as traffic
signs can cause overexposure if they are located within the recording
range. Therefore, pictures taken in night mode may be blurry.
Also, make sure to provide the camera with adequate voltage when
recording in night mode. Low voltage may cause instable recording
results.
6.6 Downloading Files onto a Computer
Memory Card
1. Insert the memory card into the card reader of your computer.
2. Open the File Explorer on your computer and double-click on the
removable memory card.
3. Copy the files from the memory card to your computer.
Connecting the Camera to your Computer
1. Connect the camera to your computer using the included USB
cable. Switch on the camera and locate the appliance as MSDC.
2. Open the File Explorer on your computer and double-click on the
removable appliance. The files are stored in the DCIM folder.
3. Copy the files from the memory card to your computer.
7. Care and Maintenance
Maintenance
• Be aware of pests nesting in the camera. A camera used outdoors
is prone to insects slipping inside the interior of the camera.
These pests might cause damage. Consider spraying the camera
with odourless insecticide before setting up.
V. 01 – 12/06/2020
WLC003
13 ©Velleman nv