Publicité
Les langues disponibles
Les langues disponibles
4.
Screw the wall bracket to the wall using the supplied screws.
5.
Mount the camera on the tripod screw. Turn the camera in the
desired direction and lock it with the lock nut.
6.
To align the camera into its final position, undo the two pivot bolts
a little, align the camera and fix the position by tightening the
two pivot bolts (see below for more information).
5.2 Alternate Mounting
Use the included mounting belt to fix the camera around a tree trunk.
5.3 Powering
WARNING – Do not puncture batteries or throw them
in fire as they may explode. Do not attempt to
recharge
Dispose
regulations. Keep batteries away from children.
•
Open the camera and remove the battery cover. Install the
batteries following to the correct polarity.
•
If the camera is low on power, please connect the camera to a
power adapter (not included, see technical specifications).
5.4 Inserting the Memory Card
Install the memory card before switching on the
camera.
Unlock the write protection and insert a formatted memory card into
the card slot. Do not force to avoid damaging the card. We
recommend using a TF card, class 6 or higher, max. 32 GB.
At first use, wait for the memory card to reach ambient temperature.
Therefore, the camera may present some delay.
To avoid damage, protect memory card from water, strong vibrations,
dust, hot sources and direct sunlight.
Note that, if the memory card is full, the camera will stop recording
automatically and the LEDs will go out.
V. 01 – 12/06/2020
WLC003
non-rechargeable
of
batteries
7
batteries
in
accordance
(alkaline).
with
local
©Velleman nv
Publicité
