Hitachi DH 24PB2 Mode D'emploi page 9

4. Crushing operation (rotation + hammering)
Bull point (Round type only)
(SDS-plus shank)
5. Bolt placing operation with Chemical Anchor. (rotation + hammering)
Standard socket
(
on the market
6. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
(SDS-plus shank)
)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Drill chuck (13 VLRB-D)
Chuck wrench
Chuck adapter (G)
(SDS-plus shank)
English
8