Bosch SH 87PW55N Série Notice D'utilisation page 25

RackMatic
®
The height of the upper rack 12 can
be adjusted in 3 steps to create more
space.
Pull the upper rack out of the
1.
dishwasher until it stops.
To lower the rack, push the
2.
RackMatic® lever inward.
To raise the rack, hold the basket
3.
on the sides of the upper rack
and lift it up.
Check spray arm for clearance
Note:
after adjustment.
Loading the Dishwasher en-us
Rack accessories
Flip tines
The upper and lower rack are fitted
with flip tines that can be folded
down depending on what you may
need to load in the rack.
Lower rack flip tines: To fold down,
pull flip tine gently forward and
release it from the notch. Push the
flip tine downward. To fold up, push
flip tines into an upright position until
the holder engages in the notch.
Upper rack flip tines: To fold down,
push flip tines downward with gentle
pressure. To fold up, push flip tines
into an upright position until the
holder engages in the notch.
25