ADE CK 1941 Mode D'emploi page 46

Setting the time and date manually
‚ If there is a delay of more than
‚ Each push of a button is
1. Press and hold the SET button until "00"
flashes in the display for the time zone
("00" is the default setting for the European
mainland).
2. Use the
time zone.
3. Press SET to save the setting. The hour will
flash in the display.
46
approx. 30 seconds between
two pushes of a button, the
setting process is automatically
terminated.
confirmed with a beep.
or buttons to select a different