Alcad KVD-47501 Mode D'emploi page 15

Remove the caps and the fixing pins from the flush-
mounted box. Choose the two fixing pins you want
to hinge the panel on to, so that it opens either to
the right or to the left or downwards.
Make the electrical connections. See wired
diagrams.
D I G I TA L V I D E O D O O R E N T R Y S Y S T E M S
Place the rings of the panel over the extracted
fixing pins. The unused pins should be placed in
their slots.
Once the connection of the other components of
the installation have been made and the monitor
mounted on the connections bracket, you will be
able to make calls. Now adjust the entrance panel.
See page 21.