Olimpia splendid PELER 6C Instructions Pour L'installation, L'emploi Et L'entretien page 51

3.4.c - Oscillation key (A7)
When the appliance is on, press this button to start or stop the air orientation
function through the vertical flaps (11) (right and left).
Press it once to start the function; the oscillation LED switches on.
Press it a second time to stop the function.
3.4.d - Mode key (A3)
When the appliance is switched on, "normal" mode is set by default.
Press this key and the mode changes according to this sequence:
Normal ---> Natural ---> Sleep ---> Normal ---> Natural ---> ...
The mode LED changes accordingly (the "natural" (B1) and "sleep" (B2) modes
are not available at "silent" speed (B3)).
The various modes work as follows:
1 - Normal (B1): the appliance works constantly at the set speed.
2 - Natural (B2): the appliance works changing air speed continuous-
3 - Sleep (B3):
3.4.e - Timer key (A9)
When the appliance is on, press this key
and the timer changes according to this
sequence:
00h (off) ---> 01h ---> 02h --->
03h ---> .. 12h ---> 00h (off) ---> ..
3.4.f - "LIGHT" button (A4)
When the appliance is on, pressing this button will make the display go off (the
appliance continues to run).
Press it again to make the display light up.
ly.
the appliance works changing air speed continuous-
ly, reducing it down to the minimum value.
h
EN - 18
PELER 6C