Olimpia splendid PELER 6C Instructions Pour L'installation, L'emploi Et L'entretien page 50

3.4 - INSTRUCTIONS FOR OPERATION
a. Insert the plug in the power socket.
When the appliance is switched on for the first time, you will hear a beep and it will
go into stand-by. All buttons will be disabled, with the exception of the ON/OFF one.
The functions can be enabled or modified either from the control panel or from the
remote control.
b. Press th ON/OFF key (A1) to switch the appliance on (a beep is heard).
c. ON/OFF key (A1) again to switch the appliance off (a beeeep is heard).
A beep is heard every time a key is pressed.
d. Manually lift the horizontal flaps as desired.
3.4.a - ON/OFF key (A1)
When the appliance is in stand-by, all buttons are disabled, with the exception
of the ON/OFF button.
Press the ON/OFF button to turn the appliance on. The display will show room
temperature in °C.
The default initial fan speed is "low" and the default operating mode is "normal";
the relative icon (B1) will light up. All functions are available.
3.4.b - Air speed key (A6)
Air speed can be changed according to this sequence:
Low --- > Medium --- > High --- > Low --- > ...
- According to the set speed, the display will show:
01 (Low)
02 (Medium)
03 (High)
- After a few seconds, the display will go back to showing the room temper-
ature detected.
EN - 17