Function Test Mode - Citizen CT-S851 II Mode D'emploi

4.4 Function Test Mode

Press and hold button 1 while turning on the printer to access the function test
mode.
Use button 3 (
Except for the self test and printing memory switch settings, all functions are for
service personnel only. Do not operate those functions.
Self test
1. While paper is loaded, press and hold button 1 while
turning the power on.
The function test mode starts and "Self test" appears
on the LCD.
2. Press button 4 (
Self test starts. The printer prints its model name,
version, DIP switch settings, memory switch settings, and a list of built-in fonts.
Note:
*: Printers with a USB interface do not have DIP switches, so the DIP switches all appear off on the
self test printout.
) to select a function, use button 4 (
).
Firmware version
Interface
Serial communication
status
(USB or Serial interface
models only)
Buffer size
— 46 —
) to execute the function.
FEED
DIP switch
settings*
(USB or Serial
interface models
only)
Memory
switch
setting