Publicité
Les langues disponibles
Les langues disponibles
English
heater. The appliance must be always placed on a flat
and stable surface.
Overview of the components
1 – Handle
3 – Function button
5 – Tip-over switch
Electrical Connection
Before plugging in the heater, check that the voltage of your domestic
–
supply corresponds to the voltage (V) indicated on the appliance.
Check that the electrical socket has a rating of 10/16 Amps.
–
Instructions for use
Installation
The appliance requires no installation; it should be used solely as a portable
appliance. Portable appliances are not suitable for use in a bathroom.
Function Switch
0
= OFF
= Only ventilation
I
= Heating at reduced power (1000 W)
II
= Heating at full power (2000 W)
Operation
–
Plug the appliance into the mains.
–
Turn the thermostat knob (2) clockwise to its maximum position (MAX).
–
Select the desired power with the function switch (3).
–
When the room reaches the desired temperature, turn the thermostat
knob (2) anti-clockwise until the control light (4) switch off which indicates
that the thermostat has been disconnected.
–
Leave it in that position and the thermostat will maintain the selected
temperature with the consequent energy saving.
–
When the heater is not in use, turn the function switch to the off position
and the thermostat to the minimum position and unplug the appliance.
4
2 – Thermostat knob
4 – Control light
Instructions for use
Publicité
