HQ Power HQSA1020 Mode D'emploi page 8

FM Radio
For the best results, install the speaker near a window as it features an internal
antenna. Select the FM mode with the mode button.
1. Auto Scan and Preset Radio Station
Short-press the play/pause button or the frequency scanning key on the remote
control to automatically scan and save the available radio stations (max. 99
stations).
2. Preset Station
In radio mode, press the next/previous button to select the next/previous preset
radio station. You can also press the preset number on the remote's keypad.
3. Auto Tune
In radio mode, hold the next/previous button pressed to go to the next/previous
radio frequency. The auto-search function will automatically search for the
frequency with a perfect reception.
USB/SD Playback
The speaker is compatible with a USB stick or SD card. Make sure the USB stick/SD card
contains only MP3 files.
Insert a USB stick in the USB port or an SD card in the SD card slot. The speaker will
automatically play the MP3 files in sequence.
1. Track Selection
Short-press the next/previous button to select the next/previous file. Hold the
next/previous button pressed to fast forward/rewind. Select the file directly using
the keypad on the remote control.
2. USB Mode
The USB mode supports the play/pause, mute, repeat, EQ and treble/bass
functions. Please refer to chapter General Operation above.
Connection of a USB stick through an extension cable is not recommended due to
possible loss of sound quality or data.
Decoding and playback of all MP3 files is not guaranteed.
Use a storage device of maximum 32 GB.
Some brands of storage devices can be incompatible or take some time to be
recognized by the speaker.
Wireless Operation
This speaker supports wireless operation so you can control the music from another
device such as a smartphone or tablet.
1. Press the mode button repeatedly to enter the wireless mode. A beep will warn
that the speaker is ready to pair.
2. Enable the wireless function on the remote device and search for the speaker in
the list.
3. The devices are paired when the speaker beeps.
4. Select and play the music from your remote device. The wireless mode supports
the next/previous, play/pause, mute, EQ and treble/bass functions. Please refer to
chapter General Operation above.
Successful pairing of all wireless devices is not guaranteed.
For best results, keep the remote device within a distance of 10 meters of the speaker.
The speaker inly supports one remote device at a time.
In case of an incoming call, the music will stop and resume to playback after the call
has ended.
Un-pair the speaker from the remote device before pairing with another remote device.
V. 02 – 15/01/2019
HQSA1020
8 ©Velleman nv