HQ Power HQSA1020 Mode D'emploi page 6

4. Overview
Refer to the illustrations on page 2 of this manual.
Control Panel
1
2
3
4
Remote Control
1
2
3
4
5
6
5. Installation
Speaker Power Connection
Install the appliance on a flat, stable and non-slippery surface.
Connect the appliance to the mains using the power cable.
Speaker Battery Charging
This device contains an internal rechargeable battery. When the device reaches end-of-
life, it must be disposed of in accordance with local regulations.
This speaker has a built-in rechargeable battery, which allows you to use the speaker
outdoors without mains. The speaker will charge as soon as you connect it to the mains.
The charging LED will turn red during charging and turn green when fully charged.
When battery power is low, the music will sound distorted. In this case, connect to the
mains and re-charge.
Charging Guidelines

For longer battery lifetime, please fully charge the battery at first use.

Charging occurs ideally with a temperature of 5 °C to 35 °C (40 °F to 95 °C).

Do not charge continuously longer than 24 hours. Excessive charging may shorten
the battery's lifetime.

Although the speaker can play music during charging, we recommend switching off
the speaker during charging.

Charging time is approximately 5 to 9 hours. Charging time varies according to the
ambient temperature and the status of battery.

Battery capacity naturally shortens over time.
V. 02 – 15/01/2019
SD card slot
play/pause
previous
next
mode
mute
increase volume
previous
frequency scanning
keypad
HQSA1020
5
6
7
8
7
8
9
10
11
12
6
display
repeat
mode
USB port
on-off
equalizer
play/pause
next
decrease volume
repeat
©Velleman nv