Cameo STUDIO PAR 64 CAN Manuel D'utilisation page 8

MODE SELECTION:
STATIC COLOUR MODE
Press the MODE button repeatedly if necessary to select the Static Colour
Mode (CXXX), then press the ENTER button (2. digit blinks) to choose one of
the static colours or the strobe function by using the UP and DOWN buttons.
C1 represents Red, C2 = Green, C3 = Blue, C4 = White and CF = Strobe.
Press ENTER again (3. and 4. digit blink) to adjust the brightness of the pre-
selected colour (CX00 - CX99) and the strobe speed (CF00 - CF99) by using
the UP and DOWN buttons. Press ENTER to confirm.
Examples: If you set C1, C2, C3 and C4 to zero, the Quad Par Can will have
no LEDs on (blackout).
If you set C1 to 99 and C2, C3 and C4 to zero, the colour will be 100% Red.
RED
Brightness C100 - C199
GREEN
Brightness C200 - C299
bLUE
Brightness C300 - C399
WHITE
Brightness C400 - C499
STRObE
Speed CF00 - CF99
8