Publicité
Les langues disponibles
Les langues disponibles
Temperature setting
Select the temperature by positioning the thermostat control knob (n°3 on pic-
ture) on the wished temperature.
Attention : if the temperature is too high, water is going to evaporate quickly.
Think to cover the whole tank with containers or lids to limit evaporation of water.
Stopping the device
Set the thermostat control knob (n°3 on picture) on 0.
Disconnect the device.
Let the device cool.
Clean it (See 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your Distributor or your store, give him
the complete reference of your device (commercial, typical name and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- Clean regularly the external walls of your device with of warm water and wash liq-
uid: avoid the abrasive towelling. Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- Regularly change the water to avoid any scale deposit
- Never use abrasive product or vinegar; it could damage the container in irremedia-
ble way.
- During non-prolonged use, we strongly recommend to keep the machine shielded
from humidity
7. TECHNICAL SPECIFICATIONS
Models
Outside dimen-
sions mm
Weight
Power
Nb element
Current
Voltage
BML 11
BMP 11
560x390x270
560x390x270
11 Kg
15 Kg
1750 W
1750 W
1
7.6 A
7.6 A
220-240 V ~
220-240 V ~
BM 21
695x640x260
23 Kg
3500 W
1
2
15 A
220-240 V ~
13
Publicité
