Signal Connections - Focusrite ISA 828 Mode D'emploi

Impedance Setting Quick Guide
In general, the following selections will yield these results:
High mic pre-amp impedance settings
· Will generate more overall level
· Will tend to make the low- and mid-frequency response of the microphone flatter
· Will improve the high-frequency response of the microphone.
Low pre-amp impedance settings
· Will reduce the microphone output level
· Will tend to emphasise the low- and mid-frequency presence peaks and resonant points of the microphone

Signal Connections

Recording from Analogue Outputs to the DAW
DAW Interface/Soundcard
Synth – Line out +4dBu
Microphone
TRS Jack XLR
25-pin
14