•
Engine driven appliances: beware of sharp and/
or moving parts. Always keep your hands away
from the moving parts when using, cleaning or
servicing the appliance.
•
Heating devices: wait until the appliance has
cooled down before you touch the housing and
parts of the unit.
Be extra careful during cleaning and servicing.
HYGIENE
In order to avoid contamination with bacteria via raw
meat, fish or poultry, it is important to handle these
ingredients carefully during the preparation process.
There are a number of things you should be aware of.
Hand washing
•
Be sure to wash your hands regularly, especially
before preparing food, after touching raw
ingredients and before eating.
•
Wash your hands with a liquid soap, for at least 15
seconds. Afterwards it is important that you dry
your hands with a clean towel or paper towel.
During preparation
•
When preparing raw ingredients, it is important
that the environment is clean and that you use
a clean cutting board and clean cutlery. Rinse
materials with hot water and soapy water for
next use.
•
It is a good idea to use a different chopping board
for vegetables and dough/bread than for raw
ingredients.
•
It is important that the cutlery used to handle the
raw ingredients is not used to handle the food once
cooked or baked. It may contain a lot of bacteria,
which can make you sick. Wash the cutlery in
between or use different knives and forks.
•
You should also ensure that prepared food does not
come into contact with products that are still raw.
•
It is also important to not burn your meat, as this
could cause harmful substances to form.
Serving the meal
•
When serving meat, fish & poultry, make sure
that the prepared food is not placed on the same
plate that the raw food has been in contact with.
INTRODUCTION
This stylish mixer is suitable for all mixing and
blending in the kitchen. With a max 1500 watts
of power and 8 speed settings, this appliance can
handle anything. There are 3 "beaters" included for
all processes. This includes dough, cake batter, egg
whites, cream, sundaes, pizza dough, biscuit dough,
etc. The rubber feet stop the mixer moving while in
use.
9
The dough hook (6) and the mixing hook (7) are not
dishwasher safe! If you wash them in the dishwasher
anyway, the metal will turn black.
IMPORTANT: SAFETY SWITCHES
This mixer has 2 safety switches:
1. Thermal protection for the motor:
This prevents overheating. If the mixer is used too
intensively the motor will switch itself off. Let the
mixer cool down for at least 10 minutes. Note: if
this does happen, unplug the power cord for a few
minutes so that the safety switch can reset itself,
and turn the speed control to 0. If you do not remove
the plug from the socket and set the switch to 0, the
motor will not switch back on. This prevents the
motor from unexpectedly starting up as soon as it
has cooled down.
2. Safety switch for the mixer head:
When the mixer head is tilted upwards, the motor
will turn off. Set the switch to 0 before tilting the
mixer head back down. After tilting the head, select
the desired speed again to switch the motor on.
OPERATION AND CONTROLS
(see figure, p.2)
The mixer includes the following parts:
1. Drive shaft for attaching the beaters
2. Lock button for lifting the mixer head
3. Speed control
The speed switch is also the on/off button:
Position 0 = off
Position 1 to 8 = on
4. Cord
5. Stainless steel mixing bowl
6. Dough hook ("beater")
7. Mixing hook ("beater")
8. Whisk ("beater")
9. Splash guard
USE
•
Clean the appliance and its parts
(see 'Maintenance and Cleaning').
•
Place the mixer on a solid surface.
•
Open the mixer head diagonally upwards by
turning the lock button (2).
•
Place the bowl on the base by positioning
the lugs at the bottom of the bowl next to the
arrow on the base, and then turn the bowl
clockwise.
•
Attach the desired "beater" to the drive
shaft by holding the slots on the beater shaft
against those on the drive shaft, pressing the
beater against the spring, and turning it anti-
clockwise until it is firmly locked in position.
EN