Publicité
Les langues disponibles
Les langues disponibles
English
6.
Service and repairs
All quality power tools will eventually require servicing
or replacement of parts because of wear from normal
use. To assure that only authorized replacement
parts will be used, all service and repairs must
be performed by a metabo HPT AUTHORIZED
SERVICE CENTER, ONLY.
7.
Maintenance of the motor
WARNING
Always wear protective goggles and dust respirators
when blowing air from the tail cover air hole with the
use of an air gun, etc.
Failure to observe this may result in ejected dust
being inhaled or entering your eyes.
The coil on the motor is an important part of the unit.
Make sure that it is not damaged or subject to oil or
water.
WARNING
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentioned below or attachments not intended for use
such as cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.
STANDARD ACCESSORIES
○
Depressed center wheel...........................................1
4-1/2" (115 mm) external dia. × 1/4" (6 mm)
thickness × 7/8" (22.23 mm) hole dia.
(Code No. 316821) ....................................... G12SE3
5" (125 mm) external dia. × 1/4" (6 mm)
thickness × 7/8" (22.23 mm) hole dia.
(Code No. 316822) ....................................... G13SE3
○
Wrench (Code No. 938332Z) ...................................1
○
Side Handle (Code No. 994322)...............................1
NOTE
Specifications are subject to change without any
obligation on the part of the metabo HPT.
12
NOTE
When work has been fi nished, blow air containing no
moisture from the tail cover air hole with the use of an
air gun, etc., while running the motor without any load
applied. This is eff ective in removing any dirt and dust
that has accumulated. Dirt and dust collecting inside
the motor may result in malfunctions.
MODIFICATIONS
metabo HPT Power Tools are constantly being
improved and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.
ACCESSORIES
Publicité
