ETNA CM544RVS Mode D'emploi page 95

OPERATION
• After preheating, you will hear an alarm and the preheating symbol
will blink.
• Put the dish on the glass baking tray, and insert it in the oven on
level 1. Press the start button.
• The programmes with ** only use the microwave function.
1. Press the Auto menu or Defrost button.
Time, weight and P01 or d01 appear in the display.
2. Use the selection buttons to select an automatic cooking
programme (see table on page 16).
The selected programme is active when the symbol stops flashing.
3. Press the Settings button to set the weight.
The weight flashes in the display.
4. Use the selection buttons to set the desired weight. Press the
Settings button again to confirm.
The weight you set depends on the selected programme.
5. Press the start button to start the automatic cooking programme.
The programmes with a * are preheated (see page 16). During
preheating, the cooking time pauses and the preheating symbol is on.
After preheating, you will hear an alarm and the preheating symbol will
blink. Put the dish on the glass baking tray, and insert it in the oven on
level 1. Press the start button.
When the cooking program is ready, you will hear 5 beeps. The fan
continues to operate for some time and then stops automatically.
If you do not press the start button, the combi microwave oven
switches itself off automatically after 15 minutes.
EN 17