A mounting frame is supplied with the ceiling assembly.
Follow the steps below to secure the air conditioner to the
roof. Refer to Figure 4.
A.
Locate the air conditioner mount gasket over the
14" to 15" square opening in the roof.
B.
Install the ceiling assembly mount frame using the
four bolts found with the ceiling assembly.
V. SECURING THE AIR CONDITIONER TO THE ROOF
C.
Proper tension has been achieved for each bolt
when any portion of each gasket indicating tab has
been pulled down even with the roof. See Figure 4.
The upper unit has now been properly installed with
optimum gasket compression.
D.
If the air conditioner is equipped with an optional
evaporator condensate pump, a 1/2" I.D. hose must
be provided that runs from the 14" square opening,
through the vehicle ceiling and down the side wall
to allow water to drain under the vehicle. The hose
must not be allowed to kink shut while making a
bend. Connect the top end of the drain hose to the
barbed fitting shown in Figure 4.
FIGURE 4
6