Singer One Plus Manuel D'instruction page 34

Table des Matières

9. ELONGATION FUNCTION BUTTON

1. Eight decorative stitches (see illustration) can be elongated

to two different sizes (x2 or x3). Select the stitch you would

like to elongate (see page 28). Upon selection of the stitch,

a x1 symbol will be shown on the LCD panel.

2. Select your preferred elongation stitch size by pressing

either the x2 or x3 button. When activated, the button will

be lit.

3. To revert back to the default size of the stitch, press the lit

button again.

10.ONE CYCLE STITCH BUTTON

1. When the "ABC" button is pressed, the One Cycle Stitch

Button is illuminated. Therefore, any stitch or stitch

sequence that is programmed will automatically sew one

cycle and stop. If you want the sequence to repeat, instead

of stopping after one cycle, press the One Cycle Stitch

Button so the light is off, deactivating the function.

2. When you press the button during the sewing of the stitch

sequence, the machine will stop at the end of the cycle

being sewn.

Available letters

Alphabet disponible

Alfabeto disponible

(

)

□

space

□

space

□

space

□

space

・

Table des Matières