Siemens iQ700 KI81F Série Notice D'utilisation page 32

en Faults – what to do?
Appliance is not cooling, display and lighting are lit.
Showroom mode switched on.
It is too warm or too cold in the cool-fresh compartment.
The standard setting has been set too high or low
(e.g. frost in the cool-fresh compartment).
--------
32
Start the appliance self-test.
~ "Appliance self-test" on page 33
When the programme has ended, the appliance
switches over to normal operation.
You can set the temperature in the cool-fresh com-
partment to be 3 settings warmer or colder. If the
temperature in the refrigerator compartment is set
to setting 0, the cool-fresh compartment has a tem-
perature of around 0 °C.
Press and hold the refrigerator
1.
compartment super button until the display tem-
perature refrigerator compartment flashes.
Press + / – button to change the setting.
2.
Setting –3 corresponds to the coldest setting.
Setting +3 corresponds to the warmest setting.
The selected setting is saved after one minute.