Power Boost; Bridging Function; Power Management - Bauknecht CTDI K 840C NE Instructions De Montage Et D'utilisation

Modules (power management)
Operation

4.18 Power boost

The power boost setting makes additional power available
for induction cooking zones. A large quantity of water can be
brought to the boil very quickly. The power boost setting ope-
rates for 5 minutes, after which the power level is automatical-
ly reduced to power setting 9.
1. Switch on the hob.
2. Then press a cooking zone selection key (e.g..
back). The selected power setting indicator will light up
brightly.
3. Press the Minus key
power setting 9.
4. Press the Plus key
boost setting. The power setting indicator will show a P.
5. After 5 minutes the power boost setting will switch off au-
tomatically. The P will go off and the power level will switch
down to 9.
Notes
• Press the minus key to prematurely de-activate the power
setting.
• Attention. risk of overheating! Do not heat up any oil/
frying fat with the power boost setting.

4.19 Bridging function

The front and the rear cooking zones may be activated to-
gether for a cooking process (bridging function). This enables
larger cookware to be used.
1. Switch on the hob.
2. Press the two cooking zone selection keys of the front
and back cooking zones simultaneously to activate the
bridging function.
The bridging function is activated, the symbol
Use the Plus key
setting.
3. To deactivate the two cooking zone selection keys press
them simultaneously again or switch off the hob.
Notes
The roaster or the pot will need to cover at least half of the
cooking zones used in order to be recognised by the pan
recognition device!

4.20 Power management

For technical reasons two cooking zones always comprise a
module and have a maximum power level.
If this power range is exceeded when a higher power setting
level or the power boost function is switched on the power
management system will reduce the power setting of the cor-
responding cooking zone of the module.
The display for this cooking zone will initially blink, after which
the highest-possible power setting will be consistently display-
ed.
once in order to set the highest
once in order to activate the power
or Minus key to select a power
GB
for
appears.
45