Options - AEG FAVORIT 55000 I Notice D'utilisation

28

OPTIONS

MULTITAB FUNCTION
Activate this function only when you
use the combi detergent tablets.
This function deactivates the flow of
rinse aid and salt. The related indicators
are off.
The programme duration can increase.
Activating the Multitab function
Activate or deactivate the Multi-
tab function before the start of a
programme. You cannot acti-
vate or deactivate this function
when a programme operates.
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to 'SETTING
AND STARTING A PROGRAMME'.
3. Press Multitab, the Multitab indica-
tor comes on.
The function stays on until you
deactivate it. Press Multitab,
the Multitab indicator goes off.
If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the Multitab function.
2. Set the water softener to the high-
est level.
3. Make sure that the salt container
and the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent
and without dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the released quantity of rinse
aid.