Use Instructions - M Confort POWER MAX Manuel De L'utilisateur Et Garantie

6. USE INSTRUCTIONS

1. Connect the heater to the mains.
2. PRESS the power button on the right side of heater.
3. TURN ON the heater by remote control, or off the heater.
4. DOWN & UP BUTTON, setting the power level.
Remote Control Instructions:
All remote controls have the same frequency, so it is possible to control
several heaters with just one remote.
1. POWER BUTTON: Turns the heater off.
2. UP BUTTON: Increase timer and level.
3. DOWN BUTTON: Decrease timer and level.
4. LEVEL BUTTON: Use to adjust the heat levels(L1-L2 L1 is
50% power and L2 is 100% ). Press the Level button then
use the up and down buttons(buttons 2 and 3) to increase or
decrease the heating level.
5. TIMER BUTTON: To set the timer from 0H-24H, which is
the number of hours it will run. 0H will display and then
adjust to the number of hours you would like to set, using
the up and down buttons(2 and 3).
08