Use Instructions - M Confort CF 2000 Manuel De L'utilisateur

6. USE INSTRUCTIONS

1. Plug the heater in the main power, and press the switch on.
The pilot lamp will flash and the heater enters stand-by mode.
2. Press "ON" button on the remote control, the buzzer will do one sound. The
pilot will light. The heater will start working in low power mode in first time use,
or pre-set power level if used before.
3. Pressing "LOW" button, heater works in 33% of the rated
power. The buzzer responds with one sound.
4. Pressing "MED" button, heater works in 66% of the rated
power. The buzzer responds with one sound.
Low Med High
5. Pressing "HIGH" button, heater works in 100% of the
rated power. The buzzer responds with one sound.
6. Pressing "OFF" button, heater will enters stand-by mode.
The buzzer responds with one sound.
On Off
Push off the switch, the heater will be power off.
07