Zanussi ZHC 92341 Notice D'utilisation page 11

CAUTION
Closely follow the instructions set out in this
manual. All responsibility, for any eventual
inconveniences, damages or fi res caused by not
complying with the instructions in this manual, is
declined. The extractor hood has been designed
exclusively for domestic use.
Warning! Do not connect the appliance to the
mains until the installation is fully complete.
Before any cleaning or maintenance
operation, disconnect hood from the mains by
removing the plug or disconnecting the mains
electrical supply.
Always wear work gloves for all installation
and maintenance operations.
The appliance is not intended for use by
children or persons with impaired physical,
sensorial or mental faculties, or if lacking in
experience or knowledge, unless they are under
supervision or have been trained in the use of the
appliance by a person responsible for their safety.
This appliance is designed to be operated
by adults, children should be monitored to ensure
that they do not play with the appliance. This
appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the appliance.
Never use the hood without effectively
mounted grating!
The hood must NEVER be used as
a support surface unless specifi cally indicated.
The premises where the appliance is nstalled
must be suffi ciently ventilated, when the kitchen
hood is used together with other gas combustion
devices or other fuels. The ducting system for this
appliance must not be connected to any existing
ventilation system which is being used for any
other purpose such as discharging exhaust fumes
from appliances burning gas or other fuels. The
fl aming of foods beneath the hood itself is severely
prohibited.
The use of exposed fl ames is detrimental to the
fi lters and may cause a fi re risk, and must therefore
be avoided in all circumstances.
Any frying must be done with care in order to make
sure that the oil does not overheat and ignite.
Accessible parts of the hood may became hot
when used with cooking appliance.
With regards to the technical and safety measures
to be adopted for fume discharging it is important
to closely follow the regulations provided by the
local authorities.
The hood must be regularly cleaned on both the
inside and outside (AT LEAST ONCE A MONTH).
This must be completed in accordance with the
www.zanussi.com
maintenance instructions provided in this manual).
Failure to follow the instructions provided in this
user guide regarding the cleaning of the hood and
fi lters will lead to the risk of fi res.
Do not use or leave the hood without the lamp
correctly mounted due to the possible risk of
electric shocks.
We will not accept any responsibility for any faults,
damage or fi res caused to the appliance as a result
of the non-observance of the instructions included
in this manual.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
the packaging in applicable containers to recycle
it. Help protect the environment and human health
and to recycle waste of electrical and electronic
appliances. Do not dispose appliances marked
with the symbol with the household waste.
Return the product to your local recycling facility
or contact your municipal offi ce department for
household waste or the shop where you purchased
this product.
USE
The hood is designed to be used either for
exhausting or fi lter version
INSTALLATION
The mains power supply must correspond to the
rating indicated on the plate situated inside the
hood. If provided with a plug connect the hood to a
socket in compliance with current regulations and
positioned in an accessible area, after installation.
If it not fi tted with a plug (direct mains connection)
or if the plug is not located in an accessible area,
after installation, apply a double pole switch
in accordance with standards which assures
the complete disconnection of the mains under
conditions relating to over-current category III, in
accordance with installation instructions.
Warning! Before re-connecting the hood circuit
to the mains supply and checking the effi cient
function, always check that the mains cable is
correctly assembled.
. Put
.
11