Skil PWRCORE 12 BY500101 Guide D'utilisation page 16

USB Charging Port (Fig . 3)
The battery pack has a USB port,
which can provide 5V 1A output
when the battery is not depleted.
a. Connect an appropriate device
to the battery (cell phone,
tablet, etc.) to a standard USB
cable.
b. Depress the battery indicating
button to activate the charging
function. During the charging,
the fuel gauge will flash green.
WARNING
charging . Discharging and charging in the same time may
cause damage to the battery pack, and possible personal
injury .
Fuel Gauge
The four LEDs on the rear housing of the battery comprise the Fuel
Gauge, indicating the current battery capacity when the battery-
indicator button is depressed.
The first LED of the fuel gauge will flash green when low battery.
Recharge the battery pack as needed.
To Attach/Detach Battery Pack
Follow the instructions in the Owner's Manual for the individual SKIL
tool.
16
Do not use the battery pack to charge
another device when the battery pack is
Fig. 3
Battery
Indicating
USB Charging
Button
Port
Fuel Gauge