Setting Down, Transportation And Storage; Maintenance; Emptying The Dust Container - Miele Blizzard CX1 Electro Mode D'emploi

Masquer les pouces Voir aussi pour Blizzard CX1 Electro:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en
This means that you can switch the
Electrobrush off during vacuuming and
the vacuum cleaner will continue to op-
erate using suction only. This is useful
when moving from vacuuming a fitted
carpet to a rug, for example.
Setting down, transportation
and storage
Park System for pauses during
vacuuming (dia. 17)
(cannot be used with the Electrobrush)
The Park System allows you to conveni-
ently park the suction tube and floor-
head during pauses.
 Slot the floorhead or floorbrush into
the parking attachment on the va-
cuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, retract the
telescopic tube fully.
Park system for storage (dia. 18)
Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Switch off
at the wall socket and remove the
plug.
 Stand the vacuum cleaner upright.
 Retract the telescopic tube fully.
 Slot the floorhead downwards into
one of the parking attachments on
either side of the vacuum cleaner (the
parking attachments cannot be used
with the Electrobrush).
This makes the vacuum cleaner easier
to carry or store.
38
For safety reasons, do not lift the
vacuum cleaner by the dust con-
tainer carrying handle.

Maintenance

Always disconnect the vacuum
cleaner from the power supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
Emptying the dust
container (dia. 19 - 24)
 Empty the dust container before the
dust has reached the max marking
on the dust container.
 Pull the dust container handle up-
wards.
 Lift the dust container upwards to re-
move it.
The contents of the container can be
disposed of with normal domestic
waste, providing they consist of gen-
eral household dust only.
 Hold the dust container close to the
bin to prevent dust from billowing out.
 Press the yellow release catch on the
bottom of the dust container.
The cover will open and the dust will fall
out.
 Close the cover making sure it clicks
into place.
 Insert the dust container into the va-
cuum cleaner from above so that it
audibly clicks into place.
 Push the handle down.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1319

Table des Matières