Illustrations - Miele Blizzard CX1 Electro Mode D'emploi

Illustrations

The illustrations referred to in the text
are shown on a separate sheet sup-
plied with the appliance.
Electrobrush operating instruc-
tions
Your vacuum cleaner is equipped with
an Electrobrush as standard. Please
read the separate operating instructions
supplied with the Electrobrush before
using it for the first time.
Connection
Attaching the suction hose
(dia. 01 + 02)
 Insert the hose connector into the
suction opening on the vacuum
cleaner until it clicks into position. To
do this, line up the guides on the two
pieces.
 If you want to separate the pieces
again, press the release catches at
the side of the hose connector, and
pull the hose out of the suction open-
ing.
Connecting the Comfort handle to
the telescopic tube (dia. 03)
 Insert the Comfort handle into the
telescopic tube until it clicks into pos-
ition.
 Press the release button to separate
the individual sections from each
other.
Connecting the telescopic suction
tube to the Electrobrush (dia. 04)
 Insert the telescopic suction tube into
the Electrobrush until it clicks into po-
sition.
Connecting the telescopic tube to
the floorhead (dia. 05)
 Push the telescopic tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into posi-
tion.
 To detach the floorhead from the suc-
tion tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Using the accessories supplied
(dia. 06)
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, covers
etc.
 Dusting brush/Dusting brush
with natural bristles, supplied
loose
(depending on model)
(only available in selected coun-
tries)
For cleaning skirting boards, as
well as ornate, carved or particu-
larly delicate objects.
The head can be swivelled to ad-
just the angle.
en
35