Getting To Know The Appliance; Your New Lava Stone Grill; Switch And Indicator Light; Overheating Protection - NEFF N64K30N0 Mode D'emploi

Getting to know the appliance

Here you can gain an overview of your new appliance's
components and functions.

Your new lava stone grill

No. Designation
1 Glass ceramic cover
2 Wire grilling rack
3 Lava stones
4 Lava stone container
5 Switch
6 Indicator light
7 Grill element
8 Grill container (water bath)

Before using for the first time

In this section, you can find out what you must do before using
your grill to prepare food for the first time. Read the Safety
information section beforehand.

Cleaning

Clean the grill and accessories thoroughly before first use
using lukewarm soapy water.

Heating the grill

Heat the empty grill for a few minutes at the highest setting.
This will eliminate the new odour. A slight development of
smoke is normal when the grill is used for the first time.
12



Switch and indicator light

Use the switch to set the heat output of the grill.You can adjust
the heat output infinitely variably. After grilling, turn the switch to
0 to switch the appliance off.
The indicator light lights up when the grill is switched on.
Note: The grill is regulated by the grill element being switched
on and off. Even at maximum power, the grill element can
switch on and off.

Overheating protection

The overheating protection switches the grill heating off when
the grill overheats. When the grill has cooled down sufficiently,
grill heating switches on again automatically.