EUROM Gardencleaner 3000 Manuel D'utilisation page 31

 Insert the vacuum/blow duct A into the leaf blower body as far as possible. Check
that all connections are fastened correctly and secure them with two screws
supplied: a long one (1) and a short one (2), see figures. Note: Short screw on
the side of the selector
switch.
 Insert the vacuum/blow duct B (with the wheels) into vacuum/blow duct A as far
as possible. Check that all connections are fastened correctly and secure them
with the last, long screw supplied (3).
Attaching the collection bag
 Prior to attaching the collection bag, check whether the vacuuming/blowing
selector switch operates smoothly and is not hindered by waste from the previous
use of the machine.
 Attach the clasp of the collection bag to the hook of the vacuuming/blowing duct
B (Figure X).
 Slide the nozzle of the collection bag over the opening of the machine until both
clamps click in place (Figure Y).
31