Google Assistant - Panasonic TX-43JS360E Mode D'emploi

account first, if you are not already signed in. Then
you will be directed to a page where you can enter
the authentication code you see on the TV and link
your TV to your Amazon account.
• If the linking process was successful you will be
asked to determine a name for your TV, called
'Friendly Name'(FN). A 'Friendly Name' is a name
that reminds you of your TV, such as 'Living Room
TV', 'Kitchen TV', 'Dining Room TV', etc. Choose an
easy-to-say name. You will say this name to tell Alexa
which TV to control. When you are done, highlight
OK and press OK.
• Examples about the use of the feature will be
displayed on the next screen. Press OK to finish
the setup.
If you carried out the setup after the first time instal-
lation you will return to the first screen of the setup
wizard when you press OK. In that case press Exit
or highlight Setup Later and press OK in order to
exit the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the internet.
Example Commands
Here are some voice commands that you can use:
Command
Alexa, turn on 'FN'
Alexa, turn off 'FN'
Alexa, play 'FN'
Alexa, pause 'FN'
Alexa, resume 'FN'
Alexa, stop 'FN'
Alexa, fast forward on 'FN'
Alexa, rewind on 'FN'
Alexa, set the volume of
'FN' to 50
Alexa, turn the volume up
on 'FN'
Alexa, turn the volume
down on 'FN'
Alexa, mute 'FN'
Alexa, unmute 'FN'
Alexa, change the input to
"input_name" on 'FN'
Alexa, change channel to
"channel_number" on 'FN'
Function
Powers on the TV
Powers off the TV
Starts media playback
Pauses media playback
Resumes media playback
Stops media playback
Advances media in fast
forward mode
Rewinds media
Sets the volume to the
specified level
Increases volume by 10
units
Decreases volume by
10 units
Mutes sound
Unmutes sound
The TV switches to the
input source with the spec-
ified name (e.g., HDMI 1)
The TV switches to the
channel with the specified
number (e.g., channel
200)
English - 32 -
Command
Alexa, change channel to
"channel_name" on 'FN'
Alexa, channel up on 'FN'
Alexa, channel down
on 'FN'
Alexa, next channel on
'FN'
FN is the abbreviation for 'Friendly Name'.

Google Assistant

Your TV works with Ok Google for voice control of your
connected devices and appliances.
Works With Ok Google
By means of this feature you can control the functions
of your TV with Google Assistant devices. In order to do
this, the setup process should be completed.
Before the setup
Complete the following procedures before you start
the setup on your TV.
• Install the Google Home application on your mobile
phone and login to your account
• Add the assistant device to your account
• Select the Vsmart TV action from the list of actions
within the application
• A screen will be displayed where you will enter the
authentication code which will be created during the
setup process on your TV in order to link your TV to
your account. Continue with the setup on your TV to
get the authentication code
Setup process
The setup can be carried out by using the Google
Assistant option in the Settings>System>Voice
Assistant menu. The wizard will guide you through
the setup process.
• On the first screen highlight Start and press OK
to proceed
• You will be asked to determine a name for your TV
on the next screen, called 'Friendly Name'(FN). A
'Friendly Name' is a name that reminds you of your
TV, such as 'Living Room TV', 'Kitchen TV', 'Dining
Room TV', etc. Choose an easy-to-say name. When
you are done, highlight OK and press OK
• An authentication code will be created and displayed
on the screen. Enter the code you see on the TV on
the Google Home application
Once the setup is complete, you will be able to control
the functions of your TV with Google Assistant.
Function
The TV switches to the
channel with the specified
name
The TV switches to the
next higher channel, if any
available
The TV switches to the
next lower channel, if any
available
The TV switches to the
next channel on the
channel list