AEG S71500TSW2 Notice D'utilisation page 26

26 www.aeg.com
3. Unscrew the left foot.
4. Unscrew the screws of the door
bottom hinge. Remove the hinge.
Put over the pin in the direction of
the arrow.
5. Unscrew and install the screw on the
opposite side.
6. Install the hinge on the opposite
side.
7. Screw the right foot.
8. Unscrew the screws of the door top
hinge.
9. Remove the hinge. Put over the pin
in the direction of the arrow. Install
the hinge on the opposite side.
1
3
10. Tighten the hinge.
11. Put the top in position.
12. Push front the top.
13. Screw both screws on the rear side.
14. Remove and install the handle on the
opposite side.
2
1
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
2
3