Bosch GWS 7-100 Professional Notice Originale page 26

OBJ_BUCH-952-002.book Page 27 Wednesday, October 14, 2009 1:34 PM
Technical Data
Angle Grinder
Article number
Rated power input
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder
spindle
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 91 dB(A);
Sound power level 102 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Surface grinding: Vibration emission value
2
a =6.5 m/s , Uncertainty K=1.5 m/s
h
Disk sanding: Vibration emission value
2
a =3.5 m/s , Uncertainty K=1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
Bosch Power Tools
GWS 7-100 GWS 7-115
Professional Professional
3 601 C88 1.. 3 601 C88 1.. 3 601 C88 2.. 3 601 C88 1..
W 720
-1
min 11000
-1
min –
mm 100
M 10
mm 17
kg 1.8
/II
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
2
,
the hands warm, organisation of work patterns.
2
.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
English | 27
GWS 7-115 E GWS 7-125
Professional Professional
720 720
11000 11000
– 2800
– 11000
115 115
M 14 M 14
22 22
1.9 1.9
/II /II
1 619 P07 577 | (14.10.09)
720
11000
–
125
M 14
22
1.9
/II