The setup menu
The setup menu allows you to customize the operation of the system.
System Setting
Snooze Duration
Radio Data System (RDS)
Information
Bass Level
Clock Time Format
Display High Brightness
Level
Display Low Brightness
Level
Room Code
Capacitive touch control
20-minute system standby
timer
System Reset
Changing a system setting
1.
Press and hold Alarm Setup/Menu until -SETUP MENU- is displayed.
2.
Press Tune/Playlist to skip to the menu item you want.
3.
Press Time + or Time – to change the setting.
4.
Press Alarm Setup/Menu to exit the setup menu or wait 10 seconds for the setup menu to exit automatically.
Factory
Menu Item
Setting
SNOOZE-
10 MIN
RADIO TEXT-
ON
BASS-
NORMAL NORMAL,
TIME-
12 HOUR 12-HOUR,
BRIGHT HI-
10
BRIGHT LO-
4
ROOM-
B _ _ _ –
TOUCH PAD-
ON
AUTO OFF-
YES
RESET ALL-
NO
Choices
Description
10 MIN, 20 MIN,
This setting determines the duration of time the system
30 MIN, 40 MIN,
remains silent when the snooze function is activated.
50 MIN, 60 MIN
ON, OFF
Enables (ON) or disables (OFF) the system to display RDS
information.
Adjusts the bass level.
REDUCED
Sets the clock display for 12-hour (AM/PM) or 24-hour time.
24-HOUR
8-15
Sets the display brightness level when the unit detects high
ambient light conditions.
1-8
Sets the display brightness level when the unit detects low
ambient light conditions.
B _ _ _ –, C _ _ – _,
Sets the room code for the system when it is connected
D _ _ – –, E _ – _ _,
to a Bose link network. The dashes following the room
F _ – _ –, G _ – – _,
letter indicate how the microswitches should be set on a
H _ – – –, I – _ _ _,
Lifestyle
J – _ _ –, K – _ – _,
L – _ – –, M – – _ _,
N – – _ –, O – – – _
ON, OFF
Enables (ON) or disables (OFF) the touch pad.
YES, NO
Enables (YES) or disables (NO) the 20-minute system
standby timer. See "Powering on or off the system" on
page 8.
NO, YES
Restores the system to factory settings.
Personalizing the System
remote control.
®
English - 13