ZANKER KBA17401SK Notice D'utilisation page 24

Table des Matières

Les langues disponibles

Push the part (Hc) on the

part (Ha).

Press the part (Hd) on the

part (Hb).

Do a final check to make sure that:

• All screws are tightened.

• The magnetic sealing strip is attached tightly to the

cabinet.

8 mm

Open the appliance door

and the kitchen furniture

door at an angle of 90°.

Insert the small square

(Hb) into guide (Ha).

Put together the appliance

door and the furniture

door and mark the holes.

8 mm

Remove the brackets and

mark a distance of 8 mm

from the outer edge of the

door where the nail must

be fitted (K).

Important! If the ambient temperature is low (for

example, in the Winter), the size of the gasket

decreases. The size of the gasket increases when the

ambient temperature increases.

Place the small square on

the guide again and fix it

with the screws supplied.

Align the kitchen furniture

door and the appliance

door by adjusting the part

Hb.

Table des Matières

Chapitres

Table des Matières