Focal Performance Expert PS 165F Manuel D'utilisation page 6

EXPERT PERFORMANCE
PS 165F/130F - PS 165FX/165F3 - PC 130F/165F
U s e r m a n u a l
2-way kits connections - PS 130F - PS 165F
Fitting the tweeter - TNF (PS 165FX/165F3 - PS 130F/165F kit)
There are two mounting possibilities available: titled or flush mount. The tweeter arrives supplied in its flush-
mounting pod. Very carefully, remove the grille, by gently prizing it off (using a paper clip will help).
Titled mounting: mount the pod firmly using the screws supplied. Feed the wire through the hole in the pod and
refit the tweeter and grille in place.
Flush mounting: cut a neat 45mm diameter hole in the panel where you want to place the tweeter. Then with the
metal mounting strip held from behind (ensuring the ends are pointing towards the hole), insert the screw through
the flush-mount pod from the front and tighten the two parts together. Feed the wire through the hole in the pod and
refit the tweeter and grille in place.
Right output Input
Input
Left output
Woofer
Tweeter
Woofer
Tweeter
6