Bosch GST 1400 CE Professional Notice Originale page 13

OBJ_BUCH-1857-002.book Page 13 Monday, September 22, 2014 12:44 PM
Action
Connecting the dust extraction
Adjusting the Cutting Angle
Mounting the metal overshoe
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching On and Off
Guide the power tool toward the
workpiece only when switched on
Lubrication when cutting metal
Plunge Cutting
Selecting Accessories
Maintenance and Cleaning
 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Bosch Power Tools
Figure Please observe
4
5
6
7
8
9
10
11
12
13
–
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Regularly spray penetrating oil onto the saw blade holder (see
figure 15, page 194).
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 16, page 194).
English | 13
Page
187–188
188–189
189
190
190
191
191–192
192
193
193
195–196
2 609 932 924 | (22.9.14)