Télécharger Imprimer la page

TDK-Lambda NNS 50-5 Mode D'emploi page 15

Masquer les pouces Voir aussi pour NNS 50-5:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
CONNECTIONS FOR PERFORMANCE CHECKS
NOTES:
1. REGULATION AND RIPPLE METERS MUST NOT BE GROUNDED THROUGH THREE WIRE LINE CORD TO GROUND.
2. PERFORM CHECKS WITH LOCAL SENSING CONNECTIONS ONLY.
3. DIAGRAM IS SHOWN FOR 230VAC. FOR OTHER VOLTAGES, CONNECT THE NEUTRAL LEAD TO THE APPROPRIATE
"N" CONNECTION ON THE INPUT TERMINAL.
4. POWER SUPPLY IS SUPPLIED WITH 3.15A FUSE FOR 85~132VAC OPERATION. 2A FUSE FOR 170~265VAC
OPERATION IS SUPPLIED IN THE PACKAGE.
SAFETY INSTRUCTIONS
1. FUSE RATING: T3.15A 250V@100/115VAC, T2A 250V@200/230VAC.
2. POWER SUPPLY MUST BE SECURED TO THE CHASSIS OF THE END USE EQUIPMENT BY 4 SCREWS, INSERTED INTO
THREADED HOLES IN THE MOUNTING SURFACE OF THE POWER SUPPLY ENCLOSURE (REFER TO OUTLINE DRWG).
3. MAX. LEAKAGE CURRENT OF THE END USE EQUIPMENT SHOULD NOT EXCEED 3.5mA.
4. DISCONNECT DEVICE
An appropriate disconnect device for this product shall be provided by the end equipment or as part of the building installation.
Furthermore, the disconnect device must have a contact separation of at least 3mm, and must disconnect both poles of the input supply simultaneously.
In all cases, the main disconnect device of this product must be easily accessible and identifiable. Examples of an appropriate disconnect device are:
an isolating switch with the on and off positions appropriately marked, a circuit breaker inside the building installation, the power supply cord or appliance
coupler, etc.
CAUTION: FUSE MUST BE REPLACED BY AUTHORIZED SERVICE PERSONNEL ONLY!
CE MARK
CE Marking when applied to a product covered by this handbook indicates compliance with the Low Voltage Directive (LVD) of the
European Union in that it complies with EN 6 2368-1.
A "Declaration of Conformity" in accordance with the preceding directive and standard has been made and is on file at our
EU representative: TDK-LAMBDA Germany GmbH, Karl-Bold-Str. 40, D-77855 Achern.
The latest revision of EU Declaration of Conformity is available via company web site www. emea tdk lambda com manual.
.
-
3
.
/

Publicité

loading

Ce manuel est également adapté pour:

Nns 50-12Nns 50-15Nns 50-24