This appliance is only designed to store wines and drinks.
•
The appliance is heavy. Be careful when moving it.
•
If your appliance is equipped with castors, remember that these are only
•
designed to facilitate minor movements. Do not move the appliance over long
distances.
Do not lean or climb on the appliance or its elements.
•
In order to avoid falling objects and to prevent damage to the appliance, do
•
not overload the compartments of the appliance.
Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect the
•
appliance.
When cleaning the appliance, do not use metal objects, steam systems,
•
volatile fluids, organic solvents or abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
•
Important information concerning installation!
To ensure proper electrical connection, follow the recommendations given in
•
the present manual.
Unpack the appliance and visually check that it is not damaged. Do not
•
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
It is recommended that the appliance be allowed to settle for at least 4 hours
•
before connecting the electrical power supply, so that the compressor fluid feed
is correct.
Proper air circulation is necessary to avoid overheating. To ensure sufficient
•
ventilation, observe the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not
•
in contact with walls or with any hot element (compressor, condenser). Observe
the installation recommendations.
The appliance should not be placed close to radiators or cooking hot plates or
•
gas
rings.
29