user's instructions
1. Put the fan on a level surface, with the grill facing the direction in which you wish to ventilate.
2. Switch the 'stop/move' oscillating button to 'move' if you wish the fan to oscillate.
Switch the 'stop/move' oscillating button to 'stop' if you wish the fan to remain in a fixed direction.
3. Connect the plug to the wall socket.
4. Adjust the speed to the required level by pressing one of the three speed buttons.
a. Speed 1 the fan operates at low speed.
b. Speed 2 the fan operates at normal speed.
c. Speed 3 the fan operates at high speed.
5. Set the time switch to the required fan operating time. The fan will automatically stop at the end of the
set time. Switch the time switch to position 'ON' if you do not wish to use the timer.
6. Stop the fan by pressing the OFF button or turning the time switch to position 'OFF'.
cleAninG And MAintenAnce
From time to time dust can accumulate in the fan housing, and on the fan blades. Remove the dust with a
brush and/or vacuum cleaner.
•
Verify that the appliance is not connected to the power supply before you clean it.
•
Make sure no moisture gets into the appliance.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
technicAl inforMAtion
Type:
Output:
Power supply:
the enVironMent
•
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
•
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
GuArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried
out during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty
appliance (in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
Figure 3
Control panel
DTF75
45W
230-240V ~ 50Hz
17