Playing Tracks In The Mood Map - Sensme™ Mood - Sony XAV-70BT Mode D'emploi

Playing tracks in the mood map
— SensMe™ mood
"SensMe™ mood" distributes tracks as dots on a
two-axis mood map, based on the characteristics
of the individual tracks.
By touching the point on the map according to
your mood, a circle appears around the touched
point, and the tracks inside the circle are played.
1
Connect a USB device set up for the
SensMe™ function.
2
Touch "Source List," then "SensMe™."
3
Touch "mood."
The two-axis mood map appears.
Mood
Type
Sad
Style
Time
15
Dots representing tracks
4
Touch the desired point on the map.
A circle appears around the touched point,
and playback of tracks inside the circle starts.
Playback of the first track starts from its most
melodic or rhythmical section*.
* May not be detected correctly.
Notes
• Only the last 200 most recently transferred tracks
using "Content Transfer" are mapped.
• Depending on the track, it may not be detected
correctly or may be mapped in the position not
suited to the track's mood.
• If the connected USB device contains many tracks, it
may take time for "SensMe™ mood" to start, due to
data reading.
Tips
• In the mood map, the currently played track is
indicated as a green dot.
• Tracks are played from the circle's center outward.
30
Circle
Fast
Happy
ZAP
Slow
12:00
Controls and indications during
"SensMe™ mood" playback
A B
Fast
Mood
Type
Sad
Style
Time
Slow
15
F
A To show the control keys: "Source List,"
"ATT," "Top." (page 18)
B To move the circle and regroup tracks.
C To change the size of the circle: small,
medium or large.
D Indicates the album artwork display*
E Indicates the elapsed playback time, track
name, artist name.
F To change parameters on the horizontal axis.
G To skip a track.
H To pause/resume play after pause.
I To enter the ZAPPIN mode. (page 33)
During ZAPPIN playback of "SensMe™
mood," the most melodic or rhythmical
sections* 2 of the tracks are played.
*1 The recommended size is from 240 × 240 to 960 ×
960 pixels.
*2 May not be detected correctly.
Changing parameters on the
horizontal axis
In the mood map, you can change parameters on
the horizontal axis. Tracks are remapped
according to the characteristics of the
parameters.
Touch To change parameters to
"Mood"
"Sad" – "Happy"
"Type"
"Acoustic" – "Electronic"
"Style" "Soft" – "Hard"
"Time"
"Morning" – "Midnight"
C D E
Happy
ZAP
12:00
G H I
1 .