How The Energizer Works - Gallagher M35 Notice D'installation

Fence energizer
Masquer les pouces Voir aussi pour M35:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29

How the energizer works

HOW THE ENERGIZER WORKS
The energizer sends electrical pulses along the fence line, about one second apart.
These pulses give the animal a short, sharp, but safe shock. The shock doesn't harm
the animal. It is suffi ciently memorable that the animal never forgets the shock,
and will avoid the fence.
Practical Hints
Check your local ordinance on fencing laws: local laws may require a permit
before use.
Periodically check that the energizer is opera ng by checking that the
indicator light is fl ashing.
Check the fence periodically. Remove any fallen branches, weeds or shrubs
because these will cause the fence to short out and will reduce animal
control.
All animals need me to learn to respect the fence. It may take several days to
train the animal and the fence may require minor adjustments.
Animals that are prone to jumping may be diffi cult to confi ne. You may need
to try diff erent fence heights to determine the best height.
Use top quality insulators: low quality or cracked insulators and plas c tubing
are not recommended because they will cause shor ng.
Use joint clamps on all steel wire connec ons to ensure a high quality circuit.
This energizer must be earthed using galvanised metal earth stakes to ensure
the electric fence works correctly.
Double Insulated Cable should be used in buildings, under gateways and
where soil could corrode exposed galvanised wire. Never use household
electrical cable. It is made for a maximum of 600 volts and will leak electricity.
On permanent power fencing, use high tensile 12.5 gauge (2.5 mm) wire.
8
Gallagher 3E1802 Small Mains Energizer User Manual

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M50M120M160

Table des Matières